Replacing the Freejet Head Cables A and B

If your head cables on your FreeJet look like this, they need to be replaced.

1. Move the Print Head Carriage all the way over to the left side of the printer to create slack.
    
   
    
2. Push the tab to the left to release the ribbon cable guide. Once released move the guide all the way to the left to remove from the frame.
    
   
    
   
    
3. When removing the ribbon cable from the holder it makes it much more easy if you fold the cable and pull it out between the 2 bottom tabs. This will help to give you a starting point to slide the cable out.
    
   
    
4. Remove the cable from the board. Attach new cable and replace boards. Connect back to print head making sure cables are in the right direction.

Buy your FREEJET 330TX Epson Print Head Here

Buy your Freejet 330TX Print Head Cable Harness Here