Melco G2 Support

Plug the provided power cord to the wall outlet. This is located on the back right sided of the printer.  You will also need to plug in a USB cable from the Printer to your PC.  

1. Remove the ink cartridges from the containers and shake each ink cartridge for 30-60 seconds. 2. Make sure the blue ink system delivery levers (shown below) are in the up position (if they are down the ink cartridge will not go all the way in the bay). 3. Insert...

You will need to level the printer using the four leveling feet on the bottom of the machine. The following tools are needed to level the printer Adjustable (Crescent) Wrench 9" or 12" level Place the level on the front machine base cover to check if the machine is level...

Unpacking Your MelcoJet G2 may have been delivered to you on a pallet, if so, you will need to first remove the printer from the pallet which may require removing bolts that clamp it down. Also, if the printer is still boxed, you will need to remove the printer from...

The MelcoJet G2 uses Piezoelectric technology in the print head, which in simplest terms, are little vibrating crystals.  These vibrating crystals are what allow ink to travel from the printhead to the printing surface, so, outside vibrations of the printer can impact print quality.  In order to ensure the best...

Overview and Specifications Printing Method Direct to Garment Inkjet Printing Nozzle Configuration 180 nozzles x 8 Printing dimensions Max 16.5" x 23.6" (420mm x 500mm) Standard platen 13" x 20" (33cm x 50cm) Dimensions 33.5" x 51.2"x17.7" (W x L x H) (850mm x1300mm x 450mm) Weight 176lb (80Kg) Printing...