Move stitches forward on SWF Machine

To move stitches forward on a SWF (single-head, multi-needle embroidery) machine, you will need to adjust the machine's settings. Here are the general steps to follow:

1. Turn off the machine and raise the presser foot.

2. Locate the machine's stitch length adjustment dial or button. This is typically located near the needle or on the control panel.

3. Adjust the stitch length to move the stitches forward. A shorter stitch length will move the stitches closer together, while a longer stitch length will move the stitches farther apart.

4. Lower the presser foot and turn the machine back on.

5. Test the new stitch length by stitching on a scrap piece of fabric before continuing with your project.

Note: The exact location and method of adjusting the stitch length may vary depending on the specific model of your SWF machine.

Please refer to the manual of your machine for more details.