EMC 10 OFF COLOR INDEX ERROR

Osman Bayrak

OFF COLOR INDEX ERROR:

  1. If the Red Color Change LED that can be seen atop the Color Change PCB covers is lit, take a screw driver and insert it into the hole that is on the Left side of the covers and turn the Cam left or right slowly to get the LED to go out. See the information in the Technical Manual that shows how to replace the Color Change PCB, and it will show where to find the hole in the left side PCB cover.
  2. When the LED is out the Needle Case is On Color. Now go to the Head Timing Menu press Enter, then do a simultaneous ALT & Up arrow which is for the Go To Head Up function, and should clear out the error.
  3. If the Color Change LED does not go out, although you have moved the Color Change Pulley which did change the Needle Case to another needle, replace the Color Change PCB. call your distributor for the part.