How to Wet Cap Your Ri1000/2000 Direct To Garment Printer

Wet capping is a process used in the maintenance of inkjet printers, including the Ricoh ri1000/2000, to prevent the printhead from drying out. The process involves applying a light coating of solution to a lint-free wipe and placing it over the printhead to keep it moist. In this blog post, we'll walk you through the steps to properly wet cap your Ricoh ri1000/2000.

Step 1: The first step in wet capping is to roll up lint-free wipes. You can purchase lint-free wipes specifically designed for this purpose

Step 2: Once you have rolled up the lint-free wipe, place it into the carriage top, making sure its big enough to cover the entire printhead. The printhead is the part of the printer that dispenses the ink onto the paper.

Step 3: Next, you'll want to lightly coat the lint-free wipe with solution. The solution will help to prevent the printhead from drying out and keep it moist. Make sure to not soak the lint-free wipe, as this can cause the solution to seep into the printer and cause damage.

Step 4: Lock the carriage cap onto the printhead Finally, lock the carriage cap onto the printhead to keep the lint-free wipe in place. This will prevent the wipe from moving around or coming off, which can cause the solution to get into the printer and cause damage.

In conclusion: Wet capping is an important process to keep your Ricoh ri1000/2000 in top working condition. By following these simple steps, you can ensure that your printer stays in good condition and continues to produce high-quality prints. If you're unsure about any step in the process, consult your printer's manual or reach out to to our support team anytime!