Increase the satin width on a design

Osman Bayrak

Question: How do I increase the satin width on a design?

Answer:
Using the STANDARD Controller:

  1. Load the design as normal
  2. Press the SETTING button
  3. Press the DOWN button to access the X SATIN command (#6)
  4. Press the SET button
  5. The machine will display X SATIN: 0 [RANGE 0 ē 5] These numbers represent the degree to which all satin columns within the design will be increased horizontally
  6. Type in your choice; i.e. 2
  7. Press the SET button
  8. Press the DOWN button to access the Y SATIN command (#7)
  9. Press the SET button
  10. The machine will display Y SATIN: 0 [RANGE 0 ē 5] These numbers represent the degree to which all satin columns within the design will be increased vertically
  11. Type in your choice; i.e. 2
  12. Press the SET button
  13. Press the PREVIOUS button twice


Using the LCD Controller:

  1. Load the design as normal
  2. Press the SETTING button (F3)
  3. Press the BASIC button (F1)
  4. Press the DOWN ARROW button (F2) to access the X SATIN command (#5)
  5. The machine will display X SATIN: 0 [RANGE 0 ē 5] These numbers represent the degree to which all satin columns within the design will be increased horizontally
  6. Type in your choice; i.e. 2
  7. Press the DOWN ARROW button (F2) to access the Y SATIN command (#6)
  8. The machine will display Y SATIN: 0 [RANGE 0 ē 5] These numbers represent the degree to which all satin columns within the design will be increased vertically
  9. Type in your choice; i.e. 2
  10. Press the PREVIOUS button twice