Create a lasting impression and captivate your clientele with STS DTF Glitter Film. Using our film is both simple and enjoyable. Firstly, print your image onto the film using STS's white ink. Afterward, apply STS's TPU powder, shake off any excess, and then place it in the oven until the TPU has melted adequately. Select your desired garment or fabric and position it onto your heat press (be sure to consider variations in temperature and pressure based on the type of fabric used). Gently press the printed film onto the fabric, ensuring the printed side is faced down, for approximately 10 to 15 seconds. We recommend waiting for the film to cool entirely before peeling it off. For an even better tactile experience, we suggest a second 5-second press. The final result will leave you in awe.
Additional information:
Impress and excite your customers by printing on STS DTF Glitter Film. Printing on our foil is easy and fun.
- Print your image using STS’s white ink onto the film
- Apply STS’s TPU powder – shake excess powder off – place in oven until TPU is appropriately melted.
- Choose your garment or fabric and place it on your heat press (temperatures and pressures may vary dependent on your fabric type) and press the printed foil with the image side facing down between 10 to 15 seconds.
- We recommend waiting for the foil to completely cool down before peeling.
- And then in a very quick motion, rip the foil off the fabric from side to side.
- We suggest using a lint roller to remove any excess foil that may be left on the fabric.
- A 2nd 5 sec. press is sometimes recommended
- You will love the finish look.