E-Zee Cap® Just Right 2.5 ounce is a medium weight Tear Away stabilizer cut specifically to fit in cap frames. Tension is maintained with the use of a cap backing, resulting in clean, clear and crisp designs. These 4" x 12" pre-cut sizes allows you to embroider on the front of the cap as well as along the sides of the front.
Available in white and black
Helpful Hint
To prevent “flagging”, be sure that the design is digitized for caps. These designs should stitch from the center out and from the bottom up. Keep the designs within the allotted sewing area of your cap and frame. Most caps require a sharp needle. If you experience needle or thread breaks try using a #80/12 standard eye needle. Using a longer piece of backing that covers two-thirds of the cap may help with hooping.Choose caps that work best with your machine. Underlay stitches can also assist in avoiding “flagging.”
#88-4.12 White
#88-4.12B Black