$5 per foot of Puff Vinyl
Give your prints a fun 3D look with puff vinyl! This material is super easy to use and only requires one press. It is easy to weed & its pressure sensitivity allows for quick and painless repositioning.
Colors GPI offers: White, black, red, royal blue, yellow, neon green, neon pink.
Blade – 45° with low pressure
Temperature
White: 290° F
Pink & Neons: 275° F
Time
10 Seconds
Peel
Hot peel. Remove carrier / transfer sheet immediately
Pressure
Medium/firm even pressure
Cut/Print
Cut mirror image
Materials
Cotton, uncoated polyester, fabric blends, polyester/acrylic, & similar fabrics. NO NYLON
Care
Wash inside out, cold water, gentle cycle. Tumble dry low
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)