Ricoh Ri100 Preparation

customer

Preparation:

Loading the fabric in the tray:

  For details, refer to User's Guide provided with the printer Ri 100. 

You can shorten the processing time by putting a garment in the tray while preheating the finisher. 

  • Press the [Power] key to turn on the power...
  • Make sure the mode switching lever is set in the center.
  • Set the temperature of the heater
    • Set the temperature according to the fabric on which you are printing. (The default setting is 'High')
  • Set the amount of time that the heater is on.
    • Set the time according to the fabric on which you are printing. (The default setting is 'Medium') 
  • When the [Preheat] key is lit, press the [Preheat] key to start preheating. 
    • When the [Preheat] key is unlit, no operation is necessary because preheating is completed. 

 

 Ricoh_Rh100_Preparation.png

Leave a comment