Ricoh RH100 Quick Operating Guide

QUICK GUIDE

This guide describes the basic printing procedures using the printer and this machine. 

In the next pages, the procedures for each step and particular cautions are explained. 

For safe and correct use, be sure to read Safety Information before using the machine. 

Guide to components of the Finisher: 

Basic Usage of the Finisher

Caution: A parent or guardian must be present if infants, children, or people who need assistance use the machine, and they should be very careful when using it. Otherwise, injury or burns may result.

The finisher has “Standard mode”, “Professional mode”, and “Professional 2 mode”.

Standard mode.

The factory-default setting is the standard mode. The finisher has the following functions to prevent children from touching the inside of the finisher accidentally when it is very hot. 

• When the inside of the finisher exceeds 70C (185F), the front cover locks. to open the front cover, press the [Stop/ Unlock] key for at least 1 second. 
  • The surface of the heater and the fabric are not in contact with each other during the fixing process, so the surface of the heater does not become dirty.

Professional mode. 

To use this mode, switch from standard mode. 

As this mode is for users who are accustomed to using the finisher, the front cover does not lock even when the temperature of the inside of the finisher exceeds 70C (185F). 

However, during press processing and fixing processing, the front cover locks regardless of whatever mode is used to prevent erroneous operations. The surface of the heater and the fabric are not in contact with each other during the fixing process, so the surface of the heater does not become dirty.

Professional 2 mode.

This mode minimizes the loss of color when T-shirts are washed.

To use this mode, switch from professional mode.

As this mode is for users who are accustomed to using the finisher, the front cover does not lock even when the temperature of the inside of the finisher exceeds 70 °C (158 °F). However, during press processing and fixing processing, the front cover locks regardless of whatever mode is used to prevent erroneous operations. The surface of the heater and the fabric are in contact with each other during the fixing process, so regular cleaning of the surface of the heater is necessary. * Refer to Operating Instructions for cleaning frequency and precautions.