Pearl Elite - Power Down

The Pearl Elite stores setting and cycle information, as well as estimated pretreatment container levels during power off. It is important to follow these shut down procedures to allow this information to be stored correctly. The Pearl Elite will not allow the unit to properly power down with pretreatment solution in the fluid lines. Be sure to follow the “Flushing the Pearl Elite” procedure before powering down.

1. To power down the Pearl Elite, enter the Maintenance Menu by pressing the Maintenance Menu icon.

2. Press the Power Down Button. (Note: if the fluid lines are not flushed with water, the Pearl Elite will not allow the unit to power down.)

3. The Pearl Elite will move the Nozzle Cart to the home position.

4. After the Nozzle Cart is in its home position, press OK to confirm power off.

5. Press the Power Off (O) button located on the right side of the Pearl Elite.

Buy the Pearl Elite Pretreatment Machine here

Read a review on the Pearl Elite Pretreatment Machine here