Anajet mPower Support

mPOWER PARTS mPOWER INK Pretreatment

CLEANING SOLUTION LINT FREE WIPES SWABS MPOWER PARTS    

Symptoms: Nozzle check pattern has large gaps Drops of ink appear on shirt when printing Visible dripping from print head plate Possible Causes: The print head surface may be dirty. Perform a print head clean 1 from the main menu followed by a nozzle check. Print head plates need to...

There are many reasons you may get the "white screen of death" on your Anajet mPower printer, however it is often when attempting to flash the firmware or after sending hundreds to thousands of designs to your printer to print. It's really important to actually Format the SD card rather...

When you get this error on your Anajet Mpower garment printer it can be really confusing. Sometimes it's as easy as turning your machine off and on. mPowers are known to have some weird electrical issues. Your other option is to re-calibrate your print heads. Follow the prompts from this...

Wow - so many layers, so many ways to clog. at $1200 ea, it's still not as complicated as an iPhone, so why the crazy price? ah, the mystery

2.7 Obstruction Laser Sensor Adjustment Tools Needed o Phillips Screwdriver o Laser Gauge The laser sensor can only be adjusted once the Table Z-axis motor limit flag has been adjusted see section 2.6 Before adjusting the laser you will need to have your printer updated to the latest firmware. To...

It is possible to use our chipless cartridges and/or refill bags with expired chipped cartridges on your Anajet Ri3000 and Ri6000.  I’m not going to say it’s the best or least annoying option, but so many of you have told us that you are tired of paying more money, waiting...

Found under the Printer tab, allows you to control how many prints the printer will do before the wiper blade engages to clean the print-head. By default, this is set to 0, meaning it will not wipe after any print. This is the recommended setting.   Removing the wipe blade...

STOP – IF THIS IS A NEW PRINTER INSTALLATION: Download the User Manual and Rip software at Anajet.com/downloads Your printer was shipped with the ink delivery system partially filled with Cleaning Solution to preserve the integrity of the ink delivery system and prevent the print heads from drying out. The...

The dark colored garment printing principles are essentially the same as light garment printing with added procedures. Refer to the basic white garment printing process prior to learning the black garment printing process. This chapter addresses only those features unique to black garment printing. The basic process is as follows:...

You can also control how long the printer will go before the maintenance station engages to seal off the print heads. The default for this setting is two minutes. The maintenance station seals off the print heads when the printer is idle; this keeps air from drying out the ink...